2deg/H Bias Stability Gyro Sensor Small Gyroscope Sensor

• Customization: Available
• Modulation Formats: Frequency State Modulation
• Measuring Principle: Physical Properties Fiber Optic Sensor
• Model NO.: MFOG24
• Production Process: SemiConductor Integrated
• Functional Type: Functional
• Material: Metal
• Accuracy Grade: 1.5deg/H
• IP Rating: IP67
• Certification: CE
• Customized: Customized
• Range: 500 Deg;/S
• Scale Factor: 3600 Lsb/O/S
• Scale Factor Nonlinearity: <300ppm
• Zero-Bias Stability: <2deg/H, 10s, 1 Sigma
• Angular Random Walk: <0.05 Deg;/H1/2
• Bias: 1.5deg/H
• Consumption: <1.5W
• Random Walk: <0.04
• Start up Time: 1s
• Bandwidth: 300Hz
• Weight: 30g
• Transport Package: Sponge and Box
• Specification: 24*40
• HS Code: 9031809090
• Production Capacity: 500/Month

Product Description

2deg/h Bias Stability Gyro Sensor Small Gyroscope Sensor

MFOG-24A micro-nano fiber optic gyroscope (hereinafter referred to as this product) is an angular rate sensor integrating optics with analog output, mechanics and electronics. It is based on the Sagnac effect, integrates a variety of micro-nano fiber devices, and realizes the detection process by detecting, processing and feeding back the phase difference generated by two beams of light propagating in opposite directions.
This product is mainly composed of optical path components, circuit components and structural components. It has the characteristics of simple structure, no moving parts, no wear parts, fast start, small size, light weight and so on. And can be apply to that attitude control and measurement of the carrier.

 

1	Input range  (°/s)	±300
2	Scale factor	7+0.7mv/^o/s
3	Bias stability (10s,1σ,°/h)	≤2
4	Bias repeatability (1σ,°/h)	≤2
5	Random walk(°/h^1/2)	≤0.02
6	Bias offset(10s,1σ)	≤0.05
7	3dB Band Width (Hz)	≥450
8	Supply voltage(V)	5+0.15
9	Power consumption(W)	≤0.7

Installation of the product
1 Installation requirements
The user shall be responsible for the installation and disassembly of the product. During this process, the product shall not be impacted, and the outer surface of the product shall not be machined.
2 Inspection before installation
A) Check the appearance of the product for physical damage such as collision;
3 Inspection after installation
     Check whether each mounting screw is secure.
Product maintenance
A) Before the product is loaded into the carrier, it is required to electrify the product at least once a year for 3600s, and it is not required to detect the electrical parameters of the product when electrifying;
B) After the product is loaded into the carrier, it is required to electrify the product at least once a year for 3600 s, and it is not required to detect the electrical parameters of the product when electrifying;

Node Definition

Num.	Definition
1	5V
2	Out-
3	Out+
4	GND

 
 Mechanical interface
The bottom surface of the product is the mounting surface, with 3 M3 threads and external mechanical connection.